Your house is your haven. You don't want to see it in a dilapidated state. As a result, you must take proper care of it. Peeling paint is one item that might detract from the aesthetics of your house. It can be an eyesore and makes your house appear unappealing. You may have put in a lot of effort to house painting, for instance, painting the living room, kitchen, and bathroom. However, if the paint begins to flake or you notice holes in the painted surface, you have a serious problem. Below are the main causes of peeling paint;
Paints of Low Quality
When it comes to adherence and flexibility, certain paint products are subpar. These paints don't stick or dry correctly, and they'll peel off in no time. House painters are usually well conversant with the different paints and their qualities; hence they can help you choose the best-fit paint for your surfaces. Most calcimine-based paints, for example, are inferior to industry-leading brands. Also, paint with a lot of pigment, resin, and fewer solvents, such as water, would be a good choice. For any effective house painting, the quality of the paint should be among the top considerations.
Painting Surface not Properly Prepared
The surface must be properly prepped for a layer of paint to adhere correctly. It won't take long for the paint to blister and peel if applied to an uneven or unprimed surface. Other problems, such as incorrectly positioned seam tapes and inadequate joint compounds, can also prevent the paint from adhering properly.
Dirty Surface
Paints do not adhere effectively to wooden, metallic, or even concrete surfaces due to dirt, grease, and oil. If the paint is applied on a very dirty surface, it will quickly bubble and expand, causing the paint to wear off fast. Therefore, before painting any surface, interior painting or exterior painting, house painters need to clean up the surface first. For wood painting, it is necessary to ensure a clean surface first before painting since they are most prone to dirt.
Painting on Incompatible Surface
Coating the existing layers with a chemically incompatible coating causes the painting to wear off within a short time. These are some of the reasons for incompatibility.
Expired Paint
Paints, like all chemicals, have an expiration date. Some paints separate, while others mould or mildew and freeze. When water-based paints are stored in a tin can, the will rusts, and may ruin the paint. If your paint shows any of these signs or has an unusually bad odour, it is likely expired, and you can expect flaking if you use it.
Excess Water on the Surface
Flaking paint on bathroom walls and ceilings, as well as exterior walls, is primarily caused by water. Water seeps through the paint layers, causing them to split and detach from the surface. This causes the skin to bulge, split, and eventually peel.
A leaking roof, gutter, flashing, or soffit can all be sources of water. It could also be caused by a porous wall that allows water to infiltrate the inner surface or splashes of water in the washroom.
Extreme Temperatures and Direct Sunshine
This is mostly experienced with roof painting. With temperatures over the typical ambient range, paint does not stick effectively to the surface. In addition, high temperatures cause the paint to dry quickly, preventing strong connections between the layers.
Oil paintings, on the other hand, are subject to cracking when exposed to direct sunshine. In addition, when exposed to light, latex and elastic paints expand and compress, diminishing their adhesive bonding.
Fortunately, flaking paint on your walls and ceilings can be repaired—all it takes is removing the previous layer and reapplying it appropriately. Contact the professional team at Hobart Painters to book the paint repair services now. Contact the team and get a free instant quote!